What you are buying:
This product is formulated with polyurethane reinforced resins to provide a tough durable satin finish when re-coating Plastic Coated Sheeting.
A versatile product widely used on building re-furbishing and all types of box formed and corrugated sheeting.
Suitable for interior and exterior use on plastic coated sheeting, timber, steel and concrete etc.
Restores Plastic Coated sheeting to look like new.
What you are buying:
Tough & durable
Hard wearing.
Re-coats Plastic coated sheeting.
Excellent water resistance.
Easy to apply.
Long lasting protection.
Adds value to your property.
How to use:
Ensure the surface is clean, dry, free from wax, oil and dust etc.
Spot paint areas of bare steel with a rust inhibiting primer or Plastisol Re-Coat
Stir paint before use to ensure uniformity.
Apply a full coat with a good quality brush or roller.
If spray applied thin with 5 to 10% of Thinner Type KPT04.
Note:When calculating your requirements please be aware that due to the shape corrugated sheeting it has a surface area which is approximately 50% greater than the surface area it covers. If you are unsure about thi calculation let me know and I will work it out for you.
Size:5 Litre. Will cover 40 sq/mts of box profile cladding.
Available colours:
Goose Wing Grey BS10A05
Merlin Grey BS18B25
Mushroom BS10B19
Moorland Green BS12B21
Olive Green BS12B27
Please specify colour at the time of ordering. There is a space at the bottom of your order form for this type of note.
Delivery: 2 to 3 day service to most UK Mainland Post Codes, the only exclusions to this are the Scottish Highlands and Off Shore Islands, please see details below.
Delivery to Scottish Highlands:
Please contact us for a delivery price to the following Post Codes:
AB31 to AB56. IV1 to IV63. KA27 to KA28. KW1 to KW14. PA21 to PA38. PH4 to PH50.
Off Shore Islands: Unfortunately due to transport restrictions we can only deliver this product to UK mainland addresses.
Technical Data:
Standard colours. As shown above. Other colours are made to order.
Dry film appearance Satin smooth
Spreading rate a 5 litre tin will cover 40 sq/mts of box profile cladding.
Touch dry @ 20oC 2 hours
Through dry @ 20oC Overnight
V.O.C. content 480 grams p/lt
Application methods Brush, roller or spray
Substrates Suitable clean and dry surfaces
Thinners & tool cleaning KPT04
Flash point Above 32oC
Pack sizes. 5lt
Shelf life. 12 months
Min application temperature 7oC
